OUR SKIS

LARGE CHOICE OF DIFFERENT CONFIGURATION.
LENGTHS AND WIDTHS TO SUITS MOST AIRCRAFTS.
ATHOS R8
ATHOS R8

Describe your image here. Click me and then “Organize Images” to change my text.

DMC R9
DMC R9

Describe your image here. Click me and then “Organize Images” to change my text.

AEARAP
AEARAP

Describe your image here. Click me and then “Organize Images” to change my text.

VAKOTA
VAKOTA

Describe your image here. Click me and then “Organize Images” to change my text.

LENDO
LENDO

Describe your image here. Click me and then “Organize Images” to change my text.

BONFE
BONFE

Describe your image here. Click me and then “Organize Images” to change my text.

main straight.jpg

40" STRAIGHT SKIS

We designed an aluminum body, for a better aerodynamic and reduced weight. The prototype ski passed compression testing up to 3700 lbs right on pedestal. With both ends supported (21” between supports), it flex 1/4” when 2500 lbs pressure is applied at mounting pedestal. This means the skis will absorb shock from bumps. 

front straight.jpg

60" STRAIGHT  SKIS

We designed an aluminum body for a better aerodynamic and reduced weight. The prototype ski passed compression testing up to 4000 lbs right on pedestal.

With both ends supported (21” between supports), it flex 1/4” when 3000 lbs pressure is applied at mounting pedestal. This means the skis will absorb shock from bumps. 

main penetration.jpg

60" MAIN WHEEL SKI

With these skis, you will be able to land almost anywhere. Take off from a clean paved runway and land on deep snowed field. It can also make it so easier to take your plane out of the hangar, roll the plane out and you are now ready to take off. You have just landed on your clean paved runway, but taxi way is not clean, it's doesn't matter, you are ready to go up to your hangar !

front penetration.jpg

40" NOSE WHEEL SKI

We designed an aluminum body, for a better aerodynamic and reduced weight. The prototype ski passed compression testing up to 4000 lbs right on pedestal.

With both ends supported (21” between supports), it flex 1/4” when 1850 lbs pressure is applied at mounting pedestal. This means the skis will absorb shock from bumps.

main retractable.jpg

60" ELECTRIC  

RETRACT SKI

We designed an aluminum body for better aerodynamic and reduced weight. The prototype ski passed compression testing up to 4000 lbs right on pedestal. With 225 lbs. push pressure from the actuator, we have a very acceptable 1000 lbs/in at the 5/8-inch diameter pivot shaft, more than is needed for any icy situations. 

Tail Skis Wh8.jpg

 

TAIL SKI

We designed this very low weight aluminum dragger tail ski capable of wheel or straight skis.

Can be easily adapted for all kind of rear fork.

Can be installed inside or outside fork.